! Konfiguracia: 
! Pre situaciu kedy PPPoe Klient je win 7 a PPOE server je cisco IOS 
! router robi aj nat 
! Zaciatok je bezny 
! pppoe server 

! spusti pppoe server  a prirad don virtual template 
bba-group pppoe global 
  virtual-template 1 
! 

! sprav loop s ip na zapozicku pre virtual-template rozhranie
interface Loopback0 
  ip address 10.255.255.1 255.255.255.255 
! 

! sprav pol pre domace routre
ip local pool Adresy 192.168.1.1 192.168.1.254 
 
  

! Virtual-Template 1 bude teraz konfigurovany viac. Budu tu obvykle upravy MTU a TCP MSS, aby sa  
! pakety aj s PPPoE hlavickou vtesnali do 1500 bajtov tela bezneho ethernetoveho ramca,  
! je to potrebne re windows, ktore si to pytaju od routra 
!a 
! povolime adaptaciu deklarovaneho PPP MTU na velkost MTU, aku ohlasuje pripajajuci  
! sa klient. Zapneme NAT, autentifikaciu, odovzdame adresu DNS servera. 

interface Virtual-Template1 
  ip unnumbered Loopback0 
  peer default ip address pool Adresy 
  mtu 1492 
  ppp mtu adaptive 
  ip tcp adjust-mss 1452 
  ip nat inside 
  ppp authentication ms-chap-v2 ms-chap chap 
  ppp ipcp dns 158.193.152.2 
 

! Klasicke veci pre NAT. Konfiguraciu outside interfejsu neuvadzam, ! nie je nicim specificka. 


ip access-list standard NAT 
  permit host 10.255.255.1 
  permit 192.168.1.0 0.0.0.255 
! 

ip nat inside source list NAT interface fa0/1 overload 

! Aktivacia PPPoE servera na ethernetovom rozhrani 
interface FastEthernet0/0
! nemal by mat adresu ani ip nat iside 
  pppoe enable group global 
  no shutdown 
  
! Username-y pre PPPoE autentifikaciu 
username someuser1 privilege 0 password 0 h3sl0
username someuser1 autocommand logout
username someuser2 privilege 0 password 0 in3h3sl0
username someuser2 autocommand logout 
  

! dopln  
! lebo novsi IOS zacne ukecane WIn ppp ignorovat, lebo posielaju velke mnozstvo ppp sprav 
! # pps(sec) cas merania)  kolko sekund ingorujes  

ppp packet throttle 1000 1 2 

======================================================================== 

Wo windows 7 treba ist do network center a v nom vybrat „setup new connection“, vybrat „connect to internet“, vybrat „setup new connection“ a ten hned ponukne Broadband PPPoE